| Size Range | 3/4” - 12” |
| Material | Mild Steel |
| Finish | Hot-Dip Galvanized / Zinc Plate |
| Service | Recommended for suspension of non-insulated, stationary pipe lines. |
| Maximum Temperature | 650 °F |
| Complies with | Federal Specification WW-H-171E (Type 1) and SP-69 (Type 1) |
| Installation | Hanger load nut above clevis must be tightened securely to assure proper hanger performance. |
| Adjustment | Vertical adjustment without removing pipe may be made from 1 1/8” to 5”. Varying with the size of clevis. Tighten upper nut after adjustment. |
| Features | - Design has yoke on outside of lower U-strap so yoke cannot slide toward centre of bolt is minimized. - Sizes 2 ½” and up have rod and two nuts instead of bolt and nut, thread length on clevis rod is such that the threads locks the nuts in place and threads are not in shear place. |
| Ordering | Specify pipe size, figure number, name. |
Adjustable Clevis Hanger with Rubber
Description
